Over voltage and short-circuit protections safeguard delicate system components
Supports the latest Intel and AMD CPUs
Energy star compliant
Fan ''Noise-Killer'' circuitry
High efficiency. Low ripple & Noise. Output over voltage, short circuit and over current protected. Complies with SFX and SFX12V standard. Noise Killer (Thermal fan speed control function). 100% Hi Pot, ATE and burn in tested. Remote On / Off function. Passive Power Factor Correction. Complies with FCC part 15 subpart J Class B and CISPR 22 Class B. Re-settable power shutdown. Approved by UL, CSA, TUV and Nemko. This will also replace model FSP200-50SNV.
AC Input: 230vAC
Temperature Range:
0*C to +25*C on full load, storage and shipping -20*C to +65*C
Humidity:
90% on operating and 95% on storage
Dielectric Withstand:
Input to frame ground 1800V AC for 1 second
Efficiency:
65% Rise
Time:
Less than 20ms on all outputs Hold Up
Time:
16.6ms minimum at 115vAC / 60Hz. 20ms minimum at 230vAC / 50Hz input voltage
Power Good Signal:
Power On delay time 100ms to 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current:
Not exceeding 3.5mA
MTBF:
100,000 hours at maximum load at +25*C
Dimension:
100 (L) x 125 (W) x 63 (H) mm
Output:
+5Vsb/Min. load 0.1A/Max. load 2.0A
-12V/Min. load 0.0A/Max. load 0.5A
+12V/Min. load 2A/Max. load 10A
+5V/Min. load 1A/Max. load 16A
+3.3V/Min. load 0.5A/Max. load 16.7A
NB: Images are indicative only
Additional Information
Small SFX12V (micro-ATX) form factor PCs. The FSP200-50SNV provides a power solution, a replacement or an upgrade. Temperature controlled fan Noise-Killer circuitry, the operation noise is reduced to a minimum.