250w 12v Flex ATX Power Supply FSP250-50PLB

Manufacturer: FSP Group

SKU: H-000467

Availability:

E-mail this product to a friend

Details

REPLACEMENT PART FSP250-50LC . Please go to this item on our webshop and order it there.

Complies with Flex ATX and ATX12V standard

Active Power Factor Correction Meeting with EN61000-3-2

High efficiency and reliability

Remote On/Off function

Internal 12V DC fan included Noise Killer (Thermal fan speed control function)

Low noise and ripple

Complies with FCC part 15 subpart J Class B and CISPR 22 Clas B

Output over voltage, short circuit, and over current protection 100% Hi-pot, ATE, and burn-in tested

Re-settable power shut down Op Temp.

Ranges 0 to +25 deg.C on 250 watt O/P load or 0 to +50 deg.C on 220 Watt O/P load.

Approved by UL 1950, CSA C22.2 No.234 Level 3, TUV EN60950, NEMKO (CB Report), CE

Connectors: 1 x 20 way, 3 x 4 way HD, 1 x 4 way FD, 1 x 12vP4

Power supply for Dedicated Micros Digital Sprite 2 CCTV Recorder

Input Range:	90-265V AC, Full Range Input
Frequency:	47Hz - 63Hz
Input Current:	5A RMS @ 115V AC, 3A RMS @ 230V AC
Inrush Current:	50A Max. for 115V AC, 80A Max. for 230 V AC Cold start
Efficiency:	68% minimum measured at nominal AC input. and maximum load on all outputs
Rise Time:	Less than 20ms.
Hold up time:	17ms minimum at nominal input voltage
Power Good signal:	Power on delay time 100ms to 500ms, off delay 1ms minimum (TTL and CMOS compatible
MTBF:	100K hours at maximum load at +25*C
Dimensions: (W x H x L)	81.5 x 40.5 x 190mm / 3.2 x 1.6 x 7.5 inches

OUTPUT SPECIFICATIONS

Output Voltage +3.3V/Minimum 0.3A/Maximum 18A
Output Voltage +5V/Minimum 0.3A/Maximum 20.0A
Output Voltage +12V/Minimum 1.5A/Maximum 16.0A
Output Voltage -12V/Minimum 0A/Maximum 0.5A
Output Voltage +5Vsb/Minimum 0A/Maximum 2.0A
+5v and +3.3vDC total output not to exceed 115 Watts
+3.3v, +5v and +12v total output cannot exceed 236.4 watts

FSP Group PC Switching Power Supply 250 W Flex ATX 12V for PENTIUM 4 , FSP250-50PLB, FSP20050PLB. High efficiency and reliability. Remote On/Off function. Internal 12V DC fan included. Noise Killer (Thermal fan speed control function).

Output Voltage	Output Current		Regulation		Output Ripple & Noise Max (P-P)
Output Voltage	Min (A)	Max (A)	Load	Line	Output Ripple & Noise Max (P-P)
+3.3V	0.3	18	±5%	±1%	50mV
+5V	0.3	20	±5%	±1%	50mV
+12V	1.5	16	±5%	±1%	120mV
-12V	0	0.5	±10%	±1%	120mV
+5VSB	0	2	±5%	±1%	50mV

NB: Images are indicative only
Additional Information
1. FSP Group PC Switching Power Supply 2. 250w Flex ATX 12V for PENTIUM 4 , FSP250-50PLB, FSP20050PLB. 3. High efficiency and reliability. Remote On/Off function. 4. Internal 12V DC fan included. 5. Noise Killer (Thermal fan speed control function) 6. FSP250-50PLB NO LONGER AVAILABLE TO ORDER. REPLACEMENT PART FSP250-50LC. Please go to this item on our webshop and order it there.
Discounts available. QUANTITY DISCOUNTS?
Weight (kg):
1.30
Warranty:
Standard Manufacturer