250w PS3 PC Power Supply FSP250-60SPV(PF)
Manufacturer: FSP Group
SKU: H-000469
Availability:

 E-mail this product to a friend
Details
PC Power Supply PS3 Type. 250 watts FSP250-60SPV(PF). 5vAC / 230vAC switched AC input.
This will replace
  • FSP145-61GW
  • FSP145-60SP
  • HP-146SSC
  • DPS-145PB-112
  • ATS-150
  • ATS-100
  • SFX2015
  • FSP145-61GN
  • FSP145-61GI power supplies. 5vAC / 230vAC switched AC input.
    It will also replace
  • the ST-250P111A as used on ships on 115vAC
  • the ST-250P111V
  • ST250-P111P
  • ST-250P111A
  • ST-250P3P
  • ST-250P3A
  • ST-250P3V

    Features
  • High efficiency
  • Low ripple & noise
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resettable power shut down
  • Internal 8 cm fan
  • 100% burn-in under high ambient temperature (50°C)
  • MTBF: 100K hours at 25°C
  • Passive PFC (Power Factor Correction) optional
  • Approved by UL, CSA, TUV, NEMKO, FCC, CB&CE
    Specifications
  • Dimension: 100 x 150 x 86mm
  • Application: For PC
  • Watt: 250
  • PFC: Passive (Optional)
    Input Specifications:
  • Voltage: 220-230VAC
  • Frequency: 47Hz-53Hz
  • Input current: 4.0 Amps. maximum/230 Vrms. 50Hz.
    Output Specifications:
  • Over-voltage protection: +5V: 6.5V (maximum), +3.3V: 4.6V (maximum), +12V: 15.5V (maximum)
  • Over-current protection: +3.3V: 58A maximum, +5V: 52V maximum, +12V: 24V maximum
  • Remote ON/OFF control: The power supply ahall accept a logic collector level which will disable/enable all output voltage (excluding +5V standby).
  • Power good signal: 230V (full load): 100-500ms
    General Specifications:
  • Efficiency: 65% min.
  • Hold-up time: 10.0 ms minimum: at 230V/50Hz (full load)
    Environmental Specifications:
  • Operating conditions: ambient temperature 0°C~25°C
  • Storage and shipping conditions: ambient temperature -20°C~+25°C
  • Dialectric withstand: input/output 1800 VAC for 1 second, input to frame ground 1800VAC for 1 second
    Output:
  • +5Vsb/Min. load 0.0A/Max. load 2.0A
  • -5V/Min. load 0.0A/Max. load 0.3A
  • -12V/Min. load 0.0A/Max. load 0.8A
  • +12V/Min. load 0.2A/Max. load 17A
  • +5V/Min. load 0.2A/Max. load 27/21.8A
  • +3.3V/Min. load 0.3A/Max. load 12.12/20A
    Upgrade for
    LiteOn PS-6161-2h1, Bestec ATX-1951D, DELTA-160GB B, DPS-110MB-1, DPS-145PB-112 HIPRO HP-A1507F3 and HP Pavilion P/N 0950-3602, 0950-3646, 0950-3657, 0950-3746, 0950-3449, 0950-3994, 5184-2191, 5185-2934, 5185-2003, 0950-4270, 6329, 6330, 6331, 6333, 6336, 6337, 6340, 6343, 6346, 6350, 6351, 6353, 6356, 56357, 6360, 6370Z, 6408, 8409, 6460, 6465, 6466, 6468, 6470Z, 64757, 7935, 8400 CTS, 8500 CTO, 8562, 8565C, 8662C, 8700A CTO, 8700I CTO, 8755C, 8756C, 8766C, 8775C, 8776C, 8785C, 8860, 8870, 9680C, 9682C, 9686C, 9688C, 9690C, 9692C, 9694C, 9695C, 9780C, 9790C, XL753, XL754, XL756, XL759, XL759, XL761, XL766, XL768, XL776, XL866, XP788, XP789, Bestec Micro ATX 200W For ATX-1956F HP Pavilion P/N: 0950-4106 (09504106) Power Supply.


    • NB: Images are indicative only
    Additional Information
    Weight (kg):
    1.60
    Warranty:
    Standard Manufacturer

     
    Product Rating: (5) | # of Ratings: 1 | (Only registered customers can rate)
    0% 50% 100%
    1-Very Poor
    2-Poor
    3-Average
    4-Good
    5-Excellent
    Sort:
    Showing comments 1-1 of 1 Comments | 1
    1. Mr Karl Shaw on 04/08/2010 said:
    Perfect DIRECT replacement/upgrade for a 10yo HP Pavilion PC. Slightly more powerful than the original and a Power Rocker Switch on the rear as a bonus. Excelent service, will definitely use again.
    (0 people found this comment helpful, 0 did not)