400w 12v V2.3 ATX Power Supply FSP400-60PFG

Manufacturer: FSP Group

SKU: H-000475

Availability:

E-mail this product to a friend

Details

Fortron 400W FSP400-60PFG (PFC) ATX P4 Quiet Computer Power Supply. A high quality and high power coefficient PFC power supply. Excellent for high quality users and overclockers! A highly filtered and quiet 400Watts, six output unit with remote on/off, built-in EMI filter, and UL, CSA, TUV, CB, CE, NEMKO approvals. Designed for Pentium 4 motherboards, also downward compatible with standard ATX motherboards. 80 Plus Bronze. Replacement for FSP400-60PFN

Features:

High efficiency.

Internal 12 VDC ball bearing fan included with Noise Killer.

Low noise and ripple.

Complies with FCC part 15 subpart J class B 115 VAC operation and CISPR 22 Class B 230 VAC operation.

Output over voltage protection.

Short circuit protection on all outputs.

MTBF above 50,000 hrs. at 25oC. 100% Hi-pot & ATE tested.

Short circuit protection on all outputs.

Resettable power shut down.

100% burn-in under high ambient temp. (50*C).

Approved by UL 1950, CSA C22.2 No. 234 Level 3, IEC 950, TUV EN 60950 or VDE 0805, NEMKO EN60950 and RoHS.

Specifications:

INPUT (Voltage):	95 ~ 264 VAC Universal Input
Frequency:	47Hz ~ 63Hz
Input Current:	8A (RMS) @ 115VAC; 4A (RMS) @ 230VAC
Inrush Current:	80A Max. for 115 VAC; 120A Max for 230VAC
DC output:	+3.3V: 28A; +5V: 40A; +12V: 15A; -12V: 0.8A; -5V: 0.3A; +5VSB: 2A
Maximum power:	400W
Temperature Range:	Operating, 0oC to +40°C. Storage, -20oC to +65°C
Temp. Coefficient:	0.01%/oC
Transient Response:	Output voltage returns in less than 1mS max. at a 25% load change
Hold-up Time:	17.6mS min. at full & nominal input voltage
Dielectric Withstand:	Input to frame ground 1800 VAC for 1 second
Humidity:	95% RH
Efficiency:	65% at DC-24 Input, at full load
Power Good Signal:	Power on delay time 100mS to 500mS, off delay 1mS min
Overload Protection:	150% maximum
Dimensions (mm):	86 (H) x 150 (W) x 140 (L)
DC Output Connectors:	Three Hard Drive IDE connectors, one floppy connector, one 12V P4 power connector, two Sata connectors, one P4 12V Aux power connector, one 20 + 4 way MB connector
DC Lead Length:	50cms from PSU to 20+4 way ATX connector

NB: Images are indicative only
Additional Information
FSP ATX Power Supplies
Discounts available. QUANTITY DISCOUNTS?
Weight (kg):
2.10
Warranty:
Standard Manufacturer