Fortron Source FSP550-80GLC Nvidia Certified SLi Ready Dual Xeon Ready Power Supply ATX | EPS 12V 550W Active PFC, Full Range Input, High Operating Efficiency, Low Energy Consumption, 8 Cm Ball Bearing Fan, 20+4Pin EPS, 8 Pin P4 4 Pin, PCI Express 6 Pin x 2, SATA x 4, Big 4 Pin x 5, Small 4 pin x 1, NVIDIA SLI Certified, supports Multi-GPU Graphics, Qualified Green Product Status, RoHS.
- Watt: 550
- Dimension: approx. 140 x 150 x 86 mm
- 550W ATX 2 | EPS 12V
- NVIDIA SLI Certified
- High efficiency | Low Power Consumption
- RoHS | G.P | WEEE
- Low ripple & noise
- Output over voltage protection
- Short circuit protection on all outputs
- Power shut down reset
- Internal 8 cm ball-bearing fan
- 100% burn-in under high ambient temperature (50°C)
- MTBF: 100K hours at 25°C
- 100% Hi-pot tested
- Line input fuse protection
- Active PFC (Power Factor Correction) circuit
- Complies with EN61000-3-2
- AC input full range
- Supports Multi-GPU Graphics
- FSP550-80GLC
- 9PB5500306 .
Input Characteristics:
Input Specifications
Voltage: 90-132VAC/ 115V , 180-264VAC/ 230V
Frequency: 47 Hz to 63 Hz
Input current: 6.5 amps maximum / 115 V
3 amps maximum / 230 V.
Specifications:
• Over-voltage protection: +5V: 5.6V-7.0V, +3.3V: 3.76V-4.8V, 12VDC:13.5V-15.6V
• Over-current protection: +5V:48A, +3.3V: 60A, +12V1:22A, +12V2:22A, +12V3:22A, +12V4:22A
• Remote ON/OFF control: The power supply shall accept a logic collector level which will disable / enable all output voltage (excluding +5V standby).
• Power good signal: turn-on delay 100 ms to 500 ms
• Efficiency: 80% Typical load at 115V , 83% Typical load at 230V
• Hold-up time: 17.0 ms minimum: at 115V / 60 Hz , 17.0 ms minimum: at 230V / 50 Hz
|
